Applications

Temperature Sensors

Nicrobell sheathed thermocouple

Stable temperature measurement at high temperatures
■Stable temperature measurement at high temperatures
Nicrobell sheathed thermocouple is excellent in heat resistance, erosion resistance, oxidation resistance, and long-term stability. The thermocouple enables stable temperature measurement at high temperatures.

FR-100 / FT-100

Temperature and level management of chemical solution
■Temperature and level management of chemical solution
In the etching and cleaning processes of semiconductor manufacturing, highly corrosive chemical solution is used. To measure temperature and level of such chemical solution, highly corrosive resistant sensors are used.

T-270Z

Resin temperature management of extruders
■Resin temperature management of extruders
Melt temperature in the cylinder can be accurately measured.

ST-50 series

Measurement of temperature distribution when glass substrates are fired / bonded
■Measurement of temperature distribution when glass substrates are fired / bonded
Temperature distribution on the glass substrate at the time of firing/bonding and a temperature of glass substrate bonding part are measured for collecting temperature profile and verifying temperature to ensure that the temperature is appropriate.
Verification of thermal design of power modules
■Verification of thermal design of power modules
Temperature measurement of semiconductor power module can be achieved at the component level during the actual operation. Temperature of small components can be easily measured.

STM-A

Surface temperature monitoring of the mold (magnet type temperature sensor)
■Surface temperature monitoring of the mold (magnet type temperature sensor)
The sensor is used to monitor if the mold temperature is appropriate. The sensor is a magnet mounting type and attached on the desired location to conduct temperature measurement.

STM-10

Surface temperature monitoring of the mold (magnet type temperature sensor)
■Surface temperature monitoring of the mold (magnet type temperature sensor)
The sensor is used to monitor if the mold temperature is appropriate. The sensor is a magnet mounting type and attached on the desired location to conduct temperature measurement.