Bayonet type thermocouples
[Applications]
Plastic molding Cylinder
Molding die
Hot runner

The tip is going to be pressure welded to
the measured object by mounting
bracket.
Suitable for measurement of hot
runners, dies and moulds.

Thermocouple with bayonet. Length can
be easily adjusted.
Easy mounting is possible by moving the
bayonet cap dependent upon the
insertion length.

挿Thermocouple with bayonet. Length can
be easily adjusted.
Decide the position of the mounting
bracket dependent upon insertion length
and fix the spring by fixed screw.

Screwed Tip Thermocouples
[Applications]
Plastic molding Cylinder
Molding die
Hot runner[

The tip is M6 size (M8 size is also
available) rotary screw. Internal screws
will be threaded in the fitting point.
*M6, M8 is based on JIS Standard.

Fixing screw type
thermocouples for
surface
temperature measurement

Fix the sensor at a 4.5mm fixed screw hole
of the tip with a screw.
Suitable for temperature measurement
for the tiny spaces.

Suitable for temperature measurement
for the pipe shaped objects and the
surface of the nozzles.

Capable of measurement of the molten
resin temperature, such as the inside of
the extruder. M16 screw is cut and its tip
directly touches to the melting resin.*M16 is based JIS Standard成

By utilizing ZHF (zero-heat-flow) method, it
eliminates thermal disturbances and
temperature errors between the tip and the
outside case and realizes more precise
temperature measurement of the melting
resin.

Capable of surface temperature
measurement of the rotating objects
such as rollers and sheets without direct
contact.

Capable of surface temperature
measurement of the rotating objects
such as rollers and sheets with direct
contact.