Products

Limit Controllers

Limit Controllers
The limit controller provides you the over/under-temperature protection for your equipment or products in process. When the temperature goes above or below the set value (high limit or low limit), the limit controller will interrupt or remove the power from the process. This output can be used for alarm or interrupting
power to the heater circuit.
For safety reason, the output will be retained until reset operation is executed even when the measured value goes back to the normal range. Reset operation can be executed by front key operation, communication, or digital input.

Temperature limit controller
SA100L

  • Temperature
  • Over/Under temperature protection
  • Over temperature timer
  • Measurement accuracy: ±0.3% of displayed value
  • Sampling time: 0.5s / 0.25s
  • DIN rail mounting type (Also installable on a panel)

Temperature Limit Controller
SA200L

  • NEW
  • Temperature
  • Over/Under temperature protection
  • Over temperature timer
  • Measurement accuracy: ±0.3% of displayed value
  • Sampling time: 0.5sec./0.25sec.
  • LCD display
  • 48×24mm size (horizontal by vertical)
  • Plug-in construction

Temperature Limit Controller
CB100L

  • Temperature
  • Over/Under temperature protection
  • Over temperature timer
  • Measurement accuracy: ±0.3% of displayed value
  • Sampling time: 0.5 sec.
  • Longtime seller of Temperature Controllers
  • Plug-in construction